Slotting And Plugging In Batteries

To insert a battery into a drone, follow these steps: 

Step 1:

Locate the side of the drone with the power terminal for connecting a battery. 

Step 2:

Remove the O ring from that side.

 

Step 3:  

Slide the battery in the slot so that the power leads of the battery are on the same side as the power leads of the drone. 

Step 4:

Center the battery in the battery slot. 

Step 5:  

Replace the O ring. 

Step 6:

Make sure the drone power cables are looped through the arm of the drone. 

Step 7:  

When it's time to plug in the battery insert the power terminal on the battery to the power terminal on the drone. 

• Related Articles

• Batteries

  Handling and safety Always handle batteries with care and treat them like explosives. Don't throw or toss the batteries, always place them gently. If a battery is accidently dropped or mishandled, give it to a Verge employee. To charge batteries, ...

• Drone Safety And Handling

  Safety protocol when working with drones: Always listen to the pilot Never go near a drone when propellors are spinning, even if it’s on the ground. If you see something that looks broken, tell a Verge team member. When drones are plugged in, never ...